Sunday, September 6, 2009

Here is our latest project.. Two front porch replacements. The existing porches were just standard concrete with one pre-cast step down to a sidewalk. The rise on the single step was eight or nine inches, which was very hard to use for the homeowners being senior citizen's. So they wanted the front porches replaced and they wanted 2 steps with smaller rises.
On the first porch we tore out the existing concrete and replaced the concrete with standard concrete, black release and stamped the porch with a slate pattern and brick border
.
We also stained the concrete with a acid stain, we did the brick border in a red color. On the slate pattern we tried to mimic the look of a grey slate. We used beige, green, grey and blue colors

We also added a guard rail from Timber Tech - Radiance Rail in the color Sandridge.

The Radiance rail is our favorite railing on the market

On the second porch the homeowner wanted the same thing just in a more budget approach. Their porch also had problems with the brick wall under the porch cracking and chipping off. So we tore out the cement porch and the brick wall under the slab and poured concrete for the wall under the cement porch

The stamp is random stone and it has the same brick border. The color is a dark sandstone with a dark brown release

The guard rail on this porch is Monarch Bermuda in the earth tone color
Thank You for checking out our blog.
Next we will be in Oakland Township MI on beautiful Twin Lakes Golf course building a composite deck. We are excited this will be the with the new Fiberon Horizon Tropics. Which it looks very similar as Ipe and has a 10 year fade and stain warranty!

Friday, August 28, 2009

New cedar deck in Southfield Mi

Here is a project we completed about a month ago
We started by tearing out a old treated pine deck
that was very old and out of code
The new deck is all cedar, 2x6 deck boards, with our typical builders rail with metal balusters, and cedar lattice.
We stained the deck after we completed the building portion. This is a benefit of choosing cedar for your deck, It can and should be stained right away. It is also a much more stable wood than treated pine ( It does not shrink very much).
In this picture you can see the 2x6 decking running on a 45 degree angle, framing is 16" on center with the 2x6 decking. You can also see the border board at the top of the steps, which overlaps the tiered fascia.
On this side of the deck there is a little bay area bump out for a grill Typical builders rail - 2x4 top and bottom rails, attached to the rail posts with a pocket hole attachment with a 2x6 deck board - cap board that is routered with a 1/2 round over bit.
On this side of the deck, the angle follows the driveway.
Another view of the bump out bay
Decking again running on a 45 degree angle.
All done
Thank You .. for reading our blog

Tuesday, August 25, 2009

Stamped and stained concrete

It has been awhile since I have updated this blog. My computer's video card crashed twice and Dell computer replaced my old computer with a new one, but it took awhile to get the new computer and to get everything transfered over from the old computer. Thank you Dell for the new computer Anyways back to the topic... Works has been a little slow. But we have been busy also Since we last updated we had just finished a Correct Deck CX composite deck. From that job we went onto to a stamped concrete job. The project was to remove a portion of a asphalt driveway that had been settling and replace with stamped concrete.
The interesting thing with this project was the settling issue we decided to dig down under the driveway to see what was going on to cause this collapsing of the driveway.
We end up digging out 15 tons of buried garbage ! There was 4 or 5 old hot water tanks, a washer, a complete rear end of a car with tires, a complete car engine and alot of metal debris.
We ended up filling a 30 yards dumpster with trash from under this driveway.
The color did not come out to good in these photo's
But we did a beige integral color with a charcoal release color. Then we stained the border a light brown and colored a few bricks in the stamped pattern to give some highlight the job turned out awesome looking and all the water issue they had were fixed. The concrete passed a big test a couple of weeks ago when we got about 7 inches of rain and it all ran off and there was no settling !
Here are a few better pictures of stained and stamped concrete. These pictures are from my father in-laws shop. The Dutch Mill.
Here you have a 8" textured border in a dark colored stain with a inside random stone stamp patern with different colored stained rocks
Here you have a brick border stained in a lighter color, inside the border there is a random stone stamp with every stone stain in different colors
We have also completed a couple of deck since the last update so I will update those project this week also Thank You for reading

Thursday, July 2, 2009

Next Project 10 x 16 Correct Deck CX Composite in Auburn Hills MI

On this project we tore off the old decking and railings.
The frame was still good, sorry I forgot to take before pictures
Here is the design picture
The deck is Correct Deck CX composite. It has a single picture frame border, DCL railing, fascia, treads, and risers in Mahogany color, and the decking is in Pebble with Pebble lattice.
The DCL railing has Deckorators round metal balusters
In the picture below - I would like to point out the squash blocks under the center of the 2x4 DCL rail.
You would be surprised how many decks I have seen without the squash blocks installed.
Every railing I have seen without the squash blocks have sagged pretty bad.
Something so simply makes a big difference
Thank You

Thursday, June 25, 2009

Our Next Project: A small pressure treated deck in Rochester Hills MI

Here is what have been building the last couple of days. A 7x20 treated pine deck with 1 foot cut corners, and 2 steps. We also built a small privacy fence at the end of the deck
Here is the design

Here is what it came out like

Privacy fence,
Treated pine 4x4 posts, 2x4 rails, 2x2 top section with cedar tongue and groove solid panels,
Next we are going to Auburn Hills to build a Correct Deck CX deck

Thursday, June 18, 2009

What we did today... Vinyl Pergola

Today we built a vinyl pergola kit from Backyard America,
The model is called "The Aspen" and it's main feature: is it's curved rafters.
We built it for a display / give away for Lumber Jack Building Center in Algonac MI. They are going to give it away for there 45 anniversary of being in business.
We augered 8" x 42" holes into the ground to bury 4x4s to support the pergola posts.
The kits are pretty easy to install, it took us about 6 hours to build, with the shade screens
Shade screens, They slide into a vinyl H-channel
The pergola kits look nice with a landscape block retaining wall built up around the base of the posts. You can also use round columns for the main posts. There is also options of staight rafters, Fabric awnings attached to the pergola, and shade blinds, and privacy fences
_______________________________
Here are a few pictures of the options for the pergolas from Backyard America
Round Columns with straight rafters
Drop down fabric blinds Fabric shade awnings attached to the pergola
Custom Pergolas
Thank You
We are off to Rochester Hills to build a small pressure treated pine deck